Multi-Tap Echo
The Multi-Tap Echo is four echo units in one. Each echo unit is like the Trail-Blazer Echo, except that there is no Looping, Scrubbing, or Warping, and there is individual Stereo Panning of each echo channel.
Parameters:
Echo-N = 1 | 2 | 3 | 4
Select echo unit N, where N is 1, 2, 3, or 4:
Delay-N
Time (in seconds) between echoes for Echo-N
Range: 0 to 16 sec (default 0.5).
Feedback-N
Controls the number of Echo-N repetitions between 1 and infinity
Range: 0 to 1 (default 0.5).
Level-N
Amplitude level of Echo-N
Range: 0 to 1 (default 1).
Master Level
Scaling on Amplitude levels.
Range: 0 to 1 (default 1).
Pan-N
Stereo panning from left to right for the N'th echo train - useful for setting up interesting
spatial "ping-pong" echoes in stereo
Range: 0 to 1 (default 0.5).
Tone-N
Feedback tone of Echo-N: Tone = 0 ("Digital") means no lowpass
filtering, while Tone = 1 ("Tape") gives maximum lowpass filtering,
like an old magnetic tape.
Range: 0 to 0.99999 (default 0).
Master Rate
Tie Echo Delay to the system-wide Master Rate multiplied by the selected scale factor from the pop-over list below the button